Home/ Connectors/Multi Pin Connector Pair

Frequency Meter. 8Digit. 100KHz-2.4Ghz


Frequency Meter. 8Digit. 100KHz-2.4Ghz
Images/34112-large.jpg Images/360-3D.jpg   California Proposition 65 Warning
Stock Number: 34112 TE
 Review Average:  
 Number of Reviews: 1
 View Reviews | Review this item
$18.95

Did we sell out of a part you need?
You may be able to purchase it directly from our overseas supplier.

 Please note the following restrictions:
   •   $50 minimum per line item
   •   $100 minimum per order

 To inquire, contact:

 Supplier: Aqua Jiang
Email: aquajiang1@outlook.com

 When emailing, please use “MPJA Customer” as the subject line and include the MPJA stock number and quantity needed. The supplier will respond with pricing, lead time and shipping costs.

SHARE
    
     Email this to a friend     

Detailed Description

View PDF Data Sheet

PLJ-8LED is a cost-effective microprocessor based, eight-digit digital frequency display. It can be used for conventional frequency measurement. Features: small size and reliable performance.
Settings are automatically saved
Features:
Processor: Microchip PIC16F648A
Power: 9V ~ 15VDC (with reverse polarity protection )
Operating current up to 160 mA
Eight 0.56in. High brightness Blue LED Display
8 Display Brightness settings (factory set to the highest)
Zero auto blanking,
2.5ppm Voltage Controlled TCXO Frequency reference
Unique gate control & accurate time algorithm (non-timed interrupt mode).
Multi Gate time:
0.01 seconds
0.1 seconds
1.0 seconds
Measurement Input:
High impedance
Three Measurement modes (Low, High & Automatic)
Low Frequency Mode
Range: 0.1 MHz ~ 60 MHz
Accuracy: ± 100Hz (0.01sec. Gate)
± 10Hz (0.1 sec. Gate)
± 1Hz (1.0 sec. Gate)
Sensitivity:
1 MHz to 60 MHz: better than 60 mVPP
High Frequency Mode
Range: 20 MHz to 2.4 GHz
Accuracy: ± 6400 Hz (0.01sec. Gate)
± 640Hz (0.1sec. Gate)
± 64Hz (1.0 sec. Gate)
Sensitivity : 20 MHz ~ 30 MHz: Better than 100mVPP
30 MHz ~ 60 MHz: Better than 50mVPP
60 MHz ~ 2.4GHz: Not tested
Auto Mode
Automatically selects the High or Low Mode according to the input signal frequency, The crossover frequency is 60 MHz.
Connections:
DC IN: HX2.54-2P socket
RF IN: HX2.54-2P socket
ICSP: (programming interface) 2.54-6P pin
L: 4-7/8” W: 1” H: 7/8” WT: .12

California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here? As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.

As an example:
   ABS plastic contains styrene
   PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
   electrolytic capacitors can contain Ethylene glycol
   Brass can contain Lead
   flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
   Aluminum alloys can contain Chromium

To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!


 Product ReviewsClick here to review this item
Excellent!
I am very pleased with the sensitivity and the performance of this unit! I was very pleasantly surprised to discover that it has an adjustable IF offset, up or down, to allow direct reading of a receiver frequency by monitoring the local oscillator. If only there was a lower cost, smaller, 5-digit version. That would be PERFECT for building into radios!
- William Barnett, CT
 

Recently Viewed Items